Parts Manual for 36S605M*00

Click Here for Exploded Diagram and Parts List to find the Location ID of the part you're after. 

If it doesn't show up in our search system, email steve@appliancespares.nz for pricing & availability. There may be a new code or its not a common item and needs to be listed

ITEM PART Nº DESCRIPTION Ex. 5898 500 550 605
1 0019 238 001 Knob, Program Selector 1 1 1
2 0038 250 680 Panel, Control 1
0038 250 681 Panel, Control 1
0038 250 682 Panel, Control 1
3 0019 241 001 Knob, Pressure Switch 1 1 1
4 0612 220 001 Button, On/Off 1 1 1
5 0120 200 041 Spring, On/Off Button 1 1 1
6 0120 200 043 Spring, Detent, Selector Knob 1 1 1
7 0109 200 001 Flange, Selector Knob 1 1 1
8 0109 200 002 Flange, Encoder Drive 1 1 1
9 0612 228 001 Button Pad, Electronic (Start/Pause) 1 1 1
10 0349 200 049 Shield, Display 1
11 0444 220 003 Lens, Progress Indicator 1
0444 220 002 Lens, Progress Indicator 1
0444 220 001 Lens, Progress Indicator 1
12 0612 230 001 Button Pad, Electronic (Eco Rinse) 1 1
13 *0600 200 003 Lens, Wash Choice/Water Temp 1 1 1
14 0612 226 001 Button Pad, Electronic (Wash Choice & Wash Temp) 1 2 2
15 0133 200 066 Housing, Control Board 1 1 1
16 0534 300 042 Switch, On/Off 1 1 1
17 0615 200 006 Fuse 1 1 1
18 0133 277 084 Housing & Control Board Assy
(Inc. Items 6, 15, 16, 17 & 20) 1 1 1
19 0534 200 172 Switch, Pressure 1 1 1
20 0005 200 022 Clamp, Transformer 1 1 1
21 0022 200 064 Plate, Locking 1 1 1
22 0022 200 063 Plate, Mixing Chamber Locking 1 1 1
23 360313 Valve, Inlet, Cold (16 litres/min) 1 1 1
24 38784409 Grommet, Inlet Valve 2 2 2
25 0150 200 074 Screw, Hi-Lo 7-19 x 1/2", Flange PD. 2 2 2
26 0150 200 084 Screw, N° 10 x 1/2", Hex. W/HD 2 2 2
27 0534 200 176 Switch, Knock Off 1 1 1
28 0030 200 110 Bracket, Knock Off Switch Mounting 1 1 1
29 0588 200 010 Capacitor, 12µF 1 1 1
30 0150 200 042 Screw, Hi-Lo 7-19 x 1/2", Pan PD. 1 1 1
31 0005 200 007 Clamp, Capacitor 1 1 1
32 0185 200 045 Lever, Knock Off 1 1 1
33 0038 257 615 Panel, Top (Inc. Items 22 & 36) 1 1 1
34 0150 200 086 Screw, Nº 8-18AB x 1", Flg HD, SS 2 2 2
35 0547 204 001 Grommet, Lid 2 2 2
36 0028 200 088 Cover, Mixing Chamber 1 1 1
37 0125 200 008 Clip 2 2 2
38 0173 200 821 Switch & Harness Assy, Lid 1 1 1
40 0045 200 022 Hinge, Lid, RH 1 1 1
41 0339 241 001 Lid Assy (Inc. Item 44) 1 1 1
42 0045 200 021 Hinge, Lid, LH 1 1 1
44 Refer Item 41 Magnet, Lid 1 1 1
45 0208 200 055 Seal, Adaptor 1 1 1
46 0173 200 837 Wiring Harness & Plug Assy 1 1 1
47 0055 201 013 Tube, Pressure Switch to Air Dome 1 1 1
48 0215 200 039 Service Cord (Ring Tongue Earth) 1 1 1
49 0028 200 093 Cover, Service Cord Harness & Air Tube Adaptor 1 1 1
50 0151 200 020 Adaptor, Service Cord Harness & Air Tube 1 1 1
51 0136 200 082 Valve, Inlet, Hot (10 litres/min) 1 1 1
NOTE: *On Model 36P500M modify to suit.

ITEM PART N° DESCRIPTION Ex. 4140 QTY
1 0571 200 105 Hose Assy., Inlet (Hot)(Braided)(Inc. Tails, Red Nuts & Items 2 & 3) 1
0571 200 104 Hose Assy., Inlet (Cold)(Braided)(Inc. Tails, Blue Nuts & Items 2 & 3) 1
2 8000 001 866 Washer, Strainer 2
3 G041131 Washer, Sealing (Braided Hose) 2
0115 400 013 Washer, Sealing (Ribbed Hose) 2
4 0065 200 012 Nut, Inlet Valve Sealing (Inc. Item 3)(Optional) 1
5 0150 200 084 Screw, N° 10 x 1/2", Hex. W/HD 7
6 0180 200 003 Hook, Outlet Hose (Production Hose) 1
0180 200 001 Hook, Outlet Hose (Spares Replacement Hose) 1
7 *0571 277 083 Hose, Outlet (Inc. Item 7)(Spares Replacement) 1
8 N.P.A. Part Not Available 0
9 0065 201 002 Nut, Inlet Hose (Red)(Ribbed Hose) 2
0065 201 001 Nut, Inlet Hose (Blue)(Ribbed Hose) 2
10 0613 400 003 Tail, Inlet Hose (Elbow)(Ribbed Hose) 2
11 W014 Clamp, Inlet Hose 2
12 0571 400 037 Hose, Inlet (Ribbed)(Spares Replacement)(Per Metre) x
13 0125 200 008 Clip 2
14 0038 250 488 Panel, Back 1
15 0150 200 039 Screw, M6 x 12 mm, Hex. HD (Captive Washer) 2
16 7550 001 022 Clamp, Hose 1
17 0692 277 079 Wrap 1
18 #0031 200 007 Leg, Levelling (Inc. Item 19) 4
19 0581 200 014 Pad, Levelling Leg 4
20 0069 200 003 Spanner, Levelling Leg 1
21 N.P.N. NOT USED IN THIS MODEL 0
22 N.P.N. NOT USED IN THIS MODEL 0
23 N.P.N. NOT USED IN THIS MODEL 0
24 N.P.N. NOT USED IN THIS MODEL 0
25 0499 200 049 Pump 1
26 0028 200 084 Cover, Pump 1
27 0125 200 033 Clip, Wiring 3
28 0126 200 021 Sleeve, Wiring Harness 1
29 360342 Cap, Suspension Rod 4
30 0613 400 004 Tail, Inlet Hose (Straight) 2
31 0150 200 098 Screw, Earth 1
32 0065 400 022 Nut, Earth 1
N.I. 0211 200 021 Grease, Suspension Rod Pivot Points (Nulon L90)(125g Tube) x
NOTE: *If outlet hose needs to be extended use Joiner, Part N° 1060 306 000 and Hose,
Part N° 0571 277 083. It is possible to join the new hose to the old, however it looks odd due to
the angled cuff plus it makes positioning of the hose more difficult.
#Some machines have been built with non-adjustable rear legs. Use the above parts as
replacements

ITEM PART N° DESCRIPTION Ex. 2300M QTY
1 0007 208 002 Cap, Agitator (Not as Illustrated) 1
2 +SEE NOTE Frame, Filter 0
3 +SEE NOTE Bag, Lint Filter 0
4 0150 200 077 Screw, M6 x 20mm, Hex. HD. S.S. 1
5 ~0231 224 001K Agitator Assy. (Spares Replacement)(Inc. Items 1, 2 & 3) 1
6 7550 001 022 Clamp, Hose 2
7 *0571 200 071 Hose, Bowl to Pump (Cut to Suit) 1
8 0005 200 020 Clamp, Air Tube 1
9 0055 201 013 Tube, Air Tube to Pressure Switch 1
10 #0138 200 039 Rod Kit, Suspension (Kit of 4) 1
11 0054 257 430 Bowl, Outer 1
12 0750 005 005 Screw, M8 x 30 mm, S.S. SKT 2
13 0005 200 008 Clamp, Spin Bowl Support Plate 1
14 0022 200 051 Plate Assy., Spin Bowl Support (Inc. Items 12 & 13) 1
15 0150 250 143 Screw 6
16 N.P.N. NOT USED IN THIS MODEL 0
17 360342 Cap, Suspension Rod 4
18 360352 Bowl, Spin 1
19 N.P.N. NOT USED IN THIS MODEL 0
20 0028 206 002 Cover, Outer Bowl (Not as Illustrated) 1
21 N.P.N. NOT USED IN THIS MODEL 0
22 0492 200 001 Protector, Air Tube 3
N.I. 0211 200 021 Grease, Suspension Rod Pivot Points (Nulon L90)(125g Tube) x
N.I. 0567 250 004 Tool, Agitator Screw Removal x
N.I. 0211 277 001 Grease, Spin Bowl Support Plate , Clamp & Screws (1 litre) x
0211 200 011 Grease, Spin Bowl Support Plate , Clamp & Screws
(75 ml)(Alternative Size)
x
NOTE: #Rod kit consists of four rods, two front and two rear. The front rods have the short springs
and the rear rods have the long springs.
~Production use a different shaped agitator. Use the above agitator as a replacement. The
replacement agitator includes a lint filter.
*Cut to suit or damage to the hose will occur.
+Not supplied with lint filter bag as standard. Filter Bag & Frame Assy are available as an
optional extra, Part Number 0081 275 003 (Inc Items 1, 2 & 3)

ITEM PART N° DESCRIPTION Ex. 2368 QTY
1 0007 204 001 Cup Assy., Dispenser 1
2 0081 203 001 Frame, Filter 1
3 0564 257 398 Bag Assy., Filter 1
4 0150 200 077 Screw, M6 x 20mm, Hex. HD. S.S. 1
5 0231 224 001K Agitator Assy. (Inc. Items 1, 2 & 3) (Not as Illustrated) 1
6 7550 001 022 Clamp, Hose 2
7 *0571 200 071 Hose, Bowl to Pump (Cut to Suit) 1
8 0005 200 020 Clamp, Air Tube 1
9 0055 201 013 Tube, Air Dome to Pressure Switch 1
10 #0138 200 039 Rod Kit, Suspension (Kit of 4) 1
11 0054 257 430 Bowl Kit, Outer 1
12 0750 005 005 Screw, M8 x 30 mm, SKT S.S. (6 mm Head) 2
13 0005 200 008 Clamp, Spin Bowl Support Plate 1
14 0022 200 050K Plate Assy., Spin Bowl Support (Inc Items 12, 13, 15 & 21) 1
15 0188 277 019 Gasket, Bowl to Plate (Kit of 2) 1
16 N.P.N. NOT USED IN THIS MODEL 0
17 360342 Cap, Suspension Rod 4
18 0054 250 429 Bowl, Spin 1
19 360356 Ring Assy., Balance 1
20 0150 200 083 Screw 8
21 0150 200 085 Screw 6
22 N.P.N. NOT USED IN THIS MODEL 0
23 0028 206 002 Cover, Outer Bowl (Not as Illustrated) 1
24 N.P.N. NOT USED IN THIS MODEL 0
25 N.P.N. NOT USED IN THIS MODEL 0
26 N.P.N. NOT USED IN THIS MODEL 0
27 0492 200 001 Protector, Air Tube 3
N.I. 0567 250 004 Tool, Agitator Screw Removal x
N.I. 0211 200 021 Grease, Suspension Rod Pivot Points (Nulon L90)(125g Tube) x
N.I. 0211 277 001 Grease, Spin Bowl Support Plate, Clamp & Screws (1 litre) x
0211 200 011 Grease, Spin Bowl Support Plate, Clamp & Screws
(75 ml)(Alternative Size) x
NOTE: #Rod kit consists of four rods, two front and two rear. The front rods have the short springs
and the rear rods have the long springs
*Cut to Suit or damage to the hose will occur

ITEM PART N° DESCRIPTION Ex. 5899 QTY
1 0208 200 042 Seal, Main 1
2 0542 200 023 Bearing, Upper (Notched) 1
3 0081 200 072 Frame, Upper (Inc. Item 2) 1
4 0150 200 081 Screw, 1/4" - 10 Plastite x 28 mm, Hex. W/HD 10
5 0150 200 084 Screw, Nº 10 x 1/2", Hex. W/HD. 2
6 0214 204 002 Motor, Brake (Spares Replacement) 1
7 0150 200 035 Screw 2
8 0115 200 087 Washer, Upper Bearing Locking 1
9 0074 200 113 Gearbox & Brake Band Assy. 1
10 0228 200 004 Boss, Clutch Spring 1
11 0542 250 064 Bearing, Lower 1
12 0081 200 080 Frame, Lower (Inc. Item 11) 1
13 0150 200 051 Screw, M8 Duo Taptite x 15 mm, Hex. W/HD 4
14 0115 200 040 Washer, Brake Lever 1
15 0184 200 001 Trigger, Brake 1
16 0185 200 046 Lever, Brake (White) 1
17 0193 200 008 Link, Brake Lever to Brake Motor 1
18 0120 200 030 Spring, Brake Lever 1
19 0693 200 004 Pawl, Clutch 1
20 0120 200 018 Spring, Brake Trigger 1
21 0065 200 032 Nut, M10 Captive Washer 1
22 0115 250 111 Washer 2
23 0197 250 401 Pulley, Drive 1
24 0198 200 005 Belt, Drive (Spares Replacement) 1
25 0007 200 033 Cap, Clutch Ratchet 1
26 0120 200 028 Spring, Clutch 1
27 SP651 Ratchet Kit, Clutch (Inc. Items 25 & 26) 1
28 *0150 200 027 Screw, Grub, M6 x 10 mm, SKT 1
29 *0197 200 030 Pulley, Motor (No Identification) 1
30 0150 200 088 Screw, M8 Duo Taptite x 28 mm, Hex. W/HD 2
31 0115 200 031 Washer, Flat 2
32 0271 200 014 Spacer, Motor 2
33 *0214 200 113 Motor, (Spares Replacement) 1
34 N.P.N. NOT USED IN THIS MODEL 0
35 N.P.N. NOT USED IN THIS MODEL 0
36 0030 200 118 Bracket, Brake Motor Plug 1
37 0150 200 082 Screw, M5 Taptite x 8 mm, Hex. W/HD. 1
39 PJ335 Tie, Wiring 2
40 N.P.N. NOT USED IN THIS MODEL 0
41 N.P.N. NOT USED IN THIS MODEL 0
42 N.P.N. NOT USED IN THIS MODEL 0
43 N.P.N. NOT USED IN THIS MODEL 0
44 0038 250 480 Shield, Brake Motor 1
45 0208 200 044 Foam, Brake Motor Shield 1
N.I. 0567 200 008 Tool, Gearbox Removal x
N.I. 0211 277 001 Grease, Main Seal (1 litre) x
0211 200 011 Grease, Main Seal (75 ml)(Alternative Size) x
N.I. 0211 277 009 Grease, Clutch Assy. & Brake Lever Pin (Shell Alvania RL2) x
NOTE: *Production use a press fit pulley (White Identification). Remember to order a pulley
and grub screw when ordering a motor, use the above parts as replacements.