Fridge Fan Blades

Replacement fan blades for fridge and freezer evaporator and condenser fans. Beko, Fisher & Paykel, Samsung, LG, and other brands. Fan blades for a range of domestic fridge freezer models. 

Most orders go out same day from our Palmerston North warehouse. Check your fridge model number and the blade diameter before ordering.

How to find the right fridge fan blade

Fridge fan blades vary by diameter, the number of blades, the shaft bore size, and whether the blade attaches with a clip, a screw, or a press fit. A blade that looks the same size can have a different bore or pitch that makes it incompatible with your motor shaft.

Before you order, check three things:

Your fridge model number. It is on a sticker inside the fridge on the left wall near the top. Write it down in full including any letters at the end.

The blade diameter and shaft bore. Measure the diameter of the old blade if you still have it. The Beko condenser fan blade 4858340185 is 145mm. A blade that is a few millimetres out will not clear the housing or will not move enough air. The shaft bore must also match the motor shaft diameter.

The product listing. Every listing states which fridge models the blade fits. Match your full model number to that list before adding to cart.

Send us a photo of the old blade alongside something for scale, along with your fridge model number. We will confirm the right replacement before you spend anything.

Signs your fridge fan blade needs replacing

Watch for these before the fridge stops cooling properly:

  • A grinding, rattling, or clicking noise from inside the freezer compartment

  • The noise changes when you open the freezer door and stops or changes pitch

  • The fridge section is warm even though the freezer feels cold

  • The blade is visibly cracked, chipped, or has a broken blade segment

  • Ice has built up around the fan area and the blade is hitting the ice buildup

A cracked fan blade causes vibration which stresses the motor bearings over time. A blade hitting ice is a sign the defrost system needs attention too. Replace the blade and check the defrost element while the back panel is already off.

Fitting a fridge fan blade

Most people have the blade replaced in under 30 minutes. The freezer back panel screws off to expose the evaporator and fan assembly. The old blade pulls off the motor shaft or unscrews depending on the model, and the replacement fits the same way.

Check the blade is seated fully on the shaft and spins freely without catching on the housing or the ice guard before reassembling the back panel.

Safety Note

Unplug the fridge before removing the back panel or accessing any internal component. The fan blade will spin if the fridge is powered. Do not touch the fan area with the fridge plugged in.

Related fridge parts

Fridge fan blade FAQ

What is the difference between a fan blade and a fan motor?

The fan motor is the electrical component that spins the shaft. The fan blade clips or screws onto the shaft and moves the air. They are separate parts. If the motor runs but the fridge is noisy or not cooling, the blade may be cracked or hitting ice. If the motor does not run at all, the motor itself has failed.

My fridge is making a clicking or grinding noise from the freezer. Is it the fan blade?

Very likely yes. A cracked blade causes vibration. A blade hitting ice buildup causes clicking or scraping. Open the freezer and listen for whether the noise changes when you open the door. If it does, the evaporator fan is the source.

How do I measure the blade diameter?

Measure from tip to tip across the widest point of the blade. If the blade is cracked but still in one piece, lay it flat and measure. If it has broken, measure the blade housing opening inside the fridge instead.

Can I replace just the blade without replacing the motor?

Yes, if the motor is still running correctly. If the motor runs but the blade is cracked or vibrating, replace the blade only. If the motor is not running, the motor needs replacing and a sparky should do that.

My fridge fan blade keeps icing up. Is that a blade problem?

Usually not. Ice buildup around the fan is typically caused by a failing defrost element or defrost thermostat. The blade itself is fine but it hits the ice that should not be there. Check the defrost element while the back panel is already off.