Vacuum Cleaner Hoses

Your vacuum has lost suction. Or it whistles where it shouldn't, the hose has split, a connector has cracked, or the whole hose has gone stiff and won't flex. 

The hose is one of the hardest-working parts on a vacuum, and it's also one of the first to wear out. A split or blocked hose can make a perfectly good vacuum feel useless. It's a straightforward part to replace. We stock vacuum cleaner hoses for upright, barrel, cordless and stick vacuums, dispatched from our NZ warehouse.

How to find the right vacuum hose

This is where most wrong orders start. Vacuum hoses are not universal. Hose length, diameter, and the shape of the connectors at each end all change between models, and a hose that looks close can fit a completely different machine.

Check three things before you order:

  • Know your model number. It's on a label on the body of the vacuum. Write it down exactly. The brand name alone won't get you the right hose.

  • Check both ends of the hose. The connector that fits the machine and the connector that fits the wand or tool are often different shapes. Look at how the old hose joins at each end, because both ends have to match.

  • Keep the old hose. If you've still got the split or worn hose, hold onto it. Matching length, diameter and the connectors at each end against the real part beats guessing from a photo.

Still not sure? Don't guess. Send us your model number and a clear photo of the old hose, including a close look at both connectors, and we'll confirm the right fit before you pay.

Signs your vacuum hose needs replacing

The hose doesn't have to fall apart before it's worth replacing. Watch for:

  • Lost suction, even when the filter and bag are clean

  • A whistling or hissing sound while the vacuum runs

  • A visible split, crack, or hole anywhere along the hose

  • The hose has gone stiff and won't flex like it used to

  • A connector at either end is cracked, loose, or won't lock on

  • A blockage you can't clear, or the hose has collapsed inside

Catch it early. A small split only gets bigger with use, and a hose that won't seal at the connectors makes the motor work harder than it should.

Fitting it and a safety note

A vacuum hose should be fitted by someone with the right expertise. That can be you, and with most vacuum hoses it usually will be. A hose is designed to come off and go back on at the connectors, so swapping one is normally a quick, tool-free job.

If you can do the job yourself, you can. But if it's not something you're confident with, hire a professional to fit the part. 

Some hose repairs are more involved. If the hose is built into the body of the machine, or replacing it means opening the vacuum's casing near the motor or wiring, that work should be left to a qualified technician. If you're unsure which kind of job yours is, email us before you start and we'll tell you.

Related parts

If the hose has worn, it's worth checking the other parts that affect suction while you're at it:

Vacuum cleaner hoses FAQ

My vacuum has lost suction but the filter is clean. What do I order?

Check the hose next. A split, a crack, or a connector that won't seal lets air in and kills suction, even when the filter and bag are clean. Run your hand along the hose while the vacuum is on and listen for a whistle. Send us your model number if you're not sure.

Are vacuum hoses universal?

No. Hose length, diameter and the connector shape at each end all vary between models. A hose that looks close can fit a different machine. Always match to your model, or to the old hose you're replacing, and check both ends.

How do I find the right hose for my vacuum?

Start with your model number from the label on the body of the machine. Then send us a photo of the old hose showing both connectors. The model number plus a photo of both ends is the most reliable way to confirm the fit.

Can I fit a vacuum hose myself?

For most vacuums, yes. The hose is designed to come off and go back on at the connectors, so it's usually a quick, tool-free job. If the hose is built into the body, or replacing it means opening the casing near the motor or wiring, that should be left to a qualified technician.

Can't see the hose you need, or not sure if the hose is the problem? Email us your model number and a photo and we'll help you find it.