Parts Manual for EWT806SA*00/913001242
Click Here for Exploded Diagram and Parts List to find the Location ID of the part you're after.
If it doesn't show up in our search system, email steve@appliancespares.nz for pricing & availability. There may be a new code or its not a common item and needs to be listed
ITEM PART Nº DESCRIPTION Ex. 6513 QTY
1 119 430 400 Lid Assy, (Inc. Item 38) 1
2 119 372 000 Sticker, Under Lid 1
3 0045 213 001K Hinge Kit, Lid (Kit of 2) 1
4 0612 220 001 Button, On/Off 1
5 0120 200 041 Spring, On/Off Button 1
6 119 355 330 Button Pad, Electronic (Programme & Options) 1
7 119 356 500 Button Pad, Electronic (Start/Pause, Favourite & Rinse) 1
8 119 416 200 Trim Assy, Control Panel (Inc. Items 6, 7, 9 & 10) 1
9 N.P.A. Shield, Display (Part Not Available) 1
10 119 355 430 Button Pad, Electronic (Soak & Delay) 1
11 0150 200 074 Screw, Hi-Lo 7-19 x 1/2", Flange PD. 4
12 0338 274 001 Panel, Control (Inc. Item 15) 1
13 Refer Item 16 Housing 1
14 0534 200 178 Switch, On/Off 1
15 0022 200 062 Plate, Locking 1
16 119 408 900K Control Board & Housing Assy, Interface (Inc. Item 13) 1
17 119 380 400 Wiring Harness Assy 1
18 0028 200 097 Cover, Harness 1
19 0332 277 006 Retainer, Dispenser Screens 1
20 119 000 160 Service Cord & Adaptor Assy (Inc. Items 22, 23, 24 &25) 1
21 0615 200 006 Fuse 1
22 0028 200 093 Cover, Adaptor 1
23 0055 201 016 Tube, Pressure Sensor to Air Dome (Cut to Suit 925mm) 1
24 0151 200 020 Adaptor, Service Cord, Harness & Air Tube 1
25 0208 200 055 Seal, Adaptor 1
26 0136 200 082 Valve, Inlet, Single (10 /min) 1
27 0133 200 089 Housing & Control Board Assy, Power (Inc Item 21) 1
28 0332 200 010 Retainer, Water Level Sensor 1
29 0698 200 013 Sensor, Water Level 1
30 119 001 100 Wiring Harness, Water Sensor 1
32 119 000 700 Sensor & Harness, Temperature 1
33 0547 200 021 Grommet, Temperature Sensor 1
34 38784409 Grommet, Inlet Valve 4
35 0136 200 091 Valve, Inlet, Triple 1
36 0534 200 176 Switch, Knock Off 1
37 0030 200 110 Bracket, Knock Off Switch Mounting 1
38 119 251 000 Facia, Lid Lock 1
39 0219 200 002 Screen, Detergent Dispenser 1
40 0007 200 035 Cap, Conditioner 1
41 0219 200 001 Screen, Conditioner Dispenser 1
42 0216 200 006 Nozzle, Eco Rinse 1
44 0185 200 045 Lever, Knock Off 1
45 0547 206 001 Grommet, Lid 2
46 0150 200 086 Screw, Nº 8-18AB x 1", Flg HD, SS 2
47 0064 277 001 Drawer, Dispenser (Inc. Item 40) 1
48 119 402 500K Panel, Top (Inc. Items 19, 39 & 41) 1
49 ES6056 Lock Assy, Lid 1
50 0150 200 104 Screw, 7-19 Hi-Lo x 1/2", SS PAN HD 2
ITEM PART N° DESCRIPTION Ex. 6430 QTY
1 0571 200 125 Hose Assy., Inlet (Hot)(Grey) (Inc. Tails, Red Nuts & Items 2 & 3) 1
0571 200 124 Hose Assy., Inlet (Cold)(Grey) (Inc. Tails, Blue Nuts & Items 2 & 3) 1
2 8000 001 866 Washer, Strainer (Spares Replacement) 2
3 G041131 Washer, Sealing (Grey Hose) 2
0115 400 013 Washer, Sealing (Ribbed Hose) 2
4 0065 200 012 Nut, Inlet Valve Sealing (Inc. Item 3)(Optional) 1
5 0065 201 002 Nut, Inlet Hose (Red) 2
5 0065 201 001 Nut, Inlet Hose (Blue) 2
6 0613 400 004 Tail, Inlet Hose (Straight) 2
7 0613 400 003 Tail, Inlet Hose (Elbow) 2
8 0005 001 019 Clamp, Inlet Hose 4
9 0571 400 037 Hose, Inlet (Spares Replacement)(Per Metre)(Ribbed) x
10 0180 200 003 Hook, Outlet Hose (Production Hose) 1
0180 200 001 Hook, Outlet Hose (Spares Replacement Hose) 1
11 *0571 277 083 Hose, Outlet (Inc. Item 10)(Spares Replacement) 1
12 360342 Cap, Suspension Rod 4
13 0065 400 022 Nut, Earth 1
14 0150 200 098 Screw, Earth 1
15 0125 200 033 Clip, Wiring 2
16 0515 200 005 Extension, Corner Bracket (R.H.) 1
17 0125 200 008 Clip 2
18 0150 200 084 Screw, N° 10 x 1/2", Hex. W/HD 11
19 0028 200 085 Cover, Pump 1
20 0499 200 049 Pump 1
21 0150 200 039 Screw, M6 x 12 mm, Hex. HD (Captive Washer) 2
22 7550 001 022 Clamp, Hose 2
23 PJ335 Tie, Wiring 2
24 0038 250 494 Panel, Back (Metal) 1
25 N.P.A. Wrap (Part Not Available) 1
26 0031 200 007 Leg & Pad Assy., Levelling (Inc. Item 27) 4
27 0581 200 014 Pad, Levelling Leg 4
28 0515 202 001 Extension, Corner Bracket (L.H.) 1
N.I. 0126 200 021 Sleeve, Harness 1
N.I. 0211 200 021 Grease, Suspension Rod Pivot Points (Nulon L90) x
NOTE: *If outlet hose needs to be extended use Joiner, Part N° 1060 306 000 and Hose,
Part N° 0571 277 083. It is possible to join the new hose to the old, however it looks odd due
to the angled cuff plus it makes positioning of the hose more difficult.
ITEM PART N° DESCRIPTION Ex. 6515 QTY
1 0150 200 083 Screw, 4
2 119 274 200 Retainer, Nozzle 1
3 Refer Item 17 Cover, Recirculation (Blue) 1
4 119 401 370 Cover, Outer Bowl (Inc. Item 5) 1
5 0208 200 023 Seal, Outer Bowl Cover 1
6 0150 200 085 Screw, M6 Taptite x 10mm, Hex HD, SS 8
7 0223 203 001 Ring Assy., Balance 1
8 119 406 100 Bowl Assy, Spin 1
9 119 267 320K Gasket, Bowl to Plate (Kit of 3)(Inc Item 12) 1
10 Refer Item 17 Nozzle, Recirculation 1
11 119 400 600K Plate Kit., Spin Bowl Support (Inc. Items 6, 9, 12, 13 & 14) 1
12 Refer Item 9 Gasket, Tube to Support Plate 1
13 0005 200 008 Clamp, Spin Bowl Support Plate 1
14 0750 005 005 Screw, M8 x 30 mm, S.S. SKT. (6 mm Head) 2
15 119 405 200 Bowl, Outer 1
16 119 120 400 Clamp, Hose 1
17 119 274 110K Hose, Recirculation (Inc. Items 3, 10 & 16) 1
18 360342 Cap, Suspension Rod 4
19 0055 201 016 Tube, Air Dome to Pressure Switch (Cut to Suit 925mm) 1
20 0492 200 001 Protector, Air Tube 3
21 0005 200 020 Clamp, Air Tube 1
22 0150 200 040 Screw, N° 6 x 1/2", W/HD. 6
23 119 274 000 Guide, Hose 1
24 0005 200 018 Clamp, Hose 1
25 119 227 500 Cover, Pump Terminals 1
26 #0138 277 066 Rod Kit, Suspension (Kit of 4) 1
27 119 376 500 Seal, O ring 1
28 119 095 200 Pump, Recirculation 1
29 119 251 200 Bracket, Pump 1
30 0150 200 081 Screw, Pump & Clutch Motor 5
31 119 270 400 Cap, Agitator (Not as Illustrated) 1
32 0081 203 001 Frame, Filter (No Cup) 1
33 0564 257 398 Bag Assy., Filter 1
34 0150 200 077 Screw, M6 x 20 mm, Hex. HD. S.S. (10 mm Head) 1
35 *0231 217 001 Agitator Assy (Single Cup)(Inc. Items 31, 32 & 33)(Spares Replacement) 1
36 0214 200 117 Motor & Gearbox Assy 1
37 0150 200 097 Screw, Motor Retaining 10
38 119 380 400 Wiring Harness 1
39 N.P.A. Screw, Earth (Part Not Available) 1
40 0214 205 001 Motor, Clutch Actuating 1
41 0571 200 110 Hose, Bowl to Pump 1
42 7550 001 022 Clamp, Hose 2
43 N.P.N. NOT USED IN THIS MODEL 0
N.I. 0567 250 004 Tool, Agitator Screw Removal 1
N.I. 0211 200 021 Grease, Suspension Rod Pivot Point (Nulon L90) x
N.I. 0211 277 001 Grease, Spin Bowl Support Plate, Clamp & Screws
and Main Seal (1 litre)
x
0211 200 011 Grease, Spin Bowl Support Plate, Clamp & Screws
and Main Seal (75 ml)(Alternative Size)
x
NOTE: #There are 4 rods supplied, all should be changed with blue rods at the front and white rods at the
rear
*Spares Agitator is supplied with a dispenser cup (as illustrated) and not a cap. If a cap is required
use the original or order Item 31 above
ITEM PART N° DESCRIPTION Ex. 6515 QTY
1 0150 200 083 Screw, 4
2 119 274 200 Retainer, Nozzle 1
3 Refer Item 17 Cover, Recirculation (Blue) 1
4 119 401 370 Cover, Outer Bowl (Inc. Item 5) 1
5 0208 200 023 Seal, Outer Bowl Cover 1
6 0150 200 085 Screw, M6 Taptite x 10mm, Hex HD, SS 8
7 0223 203 001 Ring Assy., Balance 1
8 0054 200 197 Bowl Assy, Spin 1
9 119 267 320K Gasket, Bowl to Plate (Kit of 3)(Inc Item 12) 1
10 Refer Item 17 Nozzle, Recirculation 1
11 119 400 600K Plate Kit., Spin Bowl Support (Inc. Items 6, 9, 12, 13 & 14) 1
12 Refer Item 9 Gasket, Tube to Support Plate 1
13 0005 200 008 Clamp, Spin Bowl Support Plate 1
14 0750 005 005 Screw, M8 x 30 mm, S.S. SKT. (6 mm Head) 2
15 119 405 200 Bowl, Outer 1
16 119 120 400 Clamp, Hose 1
17 119 274 110K Hose, Recirculation (Inc. Items 3, 10 & 16) 1
18 360342 Cap, Suspension Rod 4
19 0055 201 016 Tube, Air Dome to Pressure Switch (Cut to Suit 925mm) 1
20 0492 200 001 Protector, Air Tube 3
21 0005 200 020 Clamp, Air Tube 1
22 0150 200 040 Screw, N° 6 x 1/2", W/HD. 6
23 119 274 000 Guide, Hose 1
24 0005 200 018 Clamp, Hose 1
25 119 227 500 Cover, Pump Terminals
26 #0138 277 066 Rod Kit, Suspension (Kit of 4) 1
27 119 376 500 Seal, O ring 1
28 119 095 200 Pump, Recirculation 1
29 119 251 200 Bracket, Pump 1
30 0150 200 081 Screw, Pump & Clutch Motor 5
31 119 270 400 Cap, Agitator (Not as Illustrated) 1
32 0081 203 001 Frame, Filter (No Cup) 1
33 0564 257 398 Bag Assy., Filter 1
34 0150 200 077 Screw, M6 x 20 mm, Hex. HD. S.S. (10 mm Head) 1
35 *0231 217 001 Agitator Assy (Single Cup)(Inc. Items 31, 32 & 33) (Spares Replacement) 1
36 0214 200 117 Motor & Gearbox Assy 1
37 0150 200 097 Screw, Motor Retaining 10
38 119 380 200 Wiring Harness 1
39 N.P.A. Screw, Earth (Part Not Available) 1
40 0214 205 001 Motor, Clutch Actuating 1
41 0571 200 110 Hose, Bowl to Pump 1
42 7550 001 022 Clamp, Hose 2
43 N.P.N. NOT USED IN THIS MODEL 0
N.I. 0567 250 004 Tool, Agitator Screw Removal 1
N.I. 0211 200 021 Grease, Suspension Rod Pivot Point (Nulon L90) x
N.I. 0211 277 001 Grease, Spin Bowl Support Plate, Clamp & Screws
and Main Seal (1 litre)
x
0211 200 011 Grease, Spin Bowl Support Plate, Clamp & Screws
and Main Seal (75 ml)(Alternative Size)
x
NOTE: #There are 4 rods supplied, all should be changed with blue rods at the front and white rods at the
rear
*Spares Agitator is supplied with a dispenser cup (as illustrated) and not a cap. If a cap is required
use the original or order Item 31 above