573648 Fisher & Paykel DeLonghi 90cm Oven Bottom Bake Element DE906GWF 062073004

A failed bottom bake element on a 90cm oven shows up as uneven browning, cakes that stay raw underneath, and a noticeably longer preheat time. The bottom element does most of the work in standard bake mode on these large freestanding cookers, so when it goes open circuit the oven loses much of its bottom heat output.

This is the original Fisher & Paykel and DeLonghi 90cm oven bottom bake element, part codes 062073004 and 573648, used across the OR90S Series and a wide range of related DeLonghi, Elba, and PEMA / PEMX / PEMW branded 90cm ovens. It replaces the older codes SFP962 and EUT517.

Key Features

• Original Fisher & Paykel and DeLonghi 90cm bottom bake element
• Part codes: 062073004, 573648
• Replaces older codes: SFP962, EUT517
• Verified for Fisher & Paykel OR90S Series, plus DeLonghi, Elba, and PEMA / PEMX / PEMW 90cm models
• Restores full bake performance and normal preheat times
• 12 month minimum warranty (subject to manufacturer’s terms)

Product Details

• Product codes: 062073004, 573648
• Type: Original bottom bake element for 90cm freestanding ovens
• Replaces: SFP962, EUT517
• Application: Fisher & Paykel OR90S Series, DeLonghi, Elba, PEMA / PEMX / PEMW 90cm ovens
• Condition: Brand new, original part
• Stock: Check live availability on the product page
• Also known as: 062073004, 573648, SFP962, EUT517

Compatibility

This element is verified compatible with the Fisher & Paykel OR90S Series (OR90SLBGX1, OR90SDBGFX1, and OR90SCBGX1), along with a long list of related DeLonghi, Elba, and PEMA / PEMX / PEMW branded 90cm ovens. Specific model codes listed on the live product page include D906GII, L91GW, DE906GWF, PEMA 965, PEMA 965/1, DE91GW, D916GWF, M 91MFA, PEMX 166/1 GHI, PEMX 965, PEMX 965/1, PEMW 965/1, PEMX 166 GHI, M 90MFX cucina, DEF905GW, D906GWF, D90G, M 91MFX, DE91GW1, MQ 161X, and PEMW 965. The verified models list appears in the table at the end of this description. Always cross check the part code on the back of the failed element with 062073004 or 573648 before ordering, since 90cm ovens use several elements that look similar but have different power ratings and mounting dimensions.

How to Use and Installation Notes

1. Switch off the oven at the wall isolator and confirm the cavity is cold.
2. Remove the oven racks, side runners, and floor plate to expose the bottom element fixing screws.
3. Photograph the wiring at the rear of the failed element before disconnecting anything.
4. Undo the two fixing screws at the rear of the cavity and ease the element forward, taking care not to bend the element coils against the cavity walls.
5. Disconnect the terminal connections, noting the orientation of each wire.
6. Reverse the steps to fit the new 573648 element, reconnecting wires to the matching terminals and torqueing screws firmly but not over tightly.
7. Refit the floor plate, side runners, and oven racks.
8. Restore power, run the oven on bake at 180C for 15 to 20 minutes empty to burn off any manufacturing residue, then confirm even heat from the floor of the cavity.

Fitting and Safety Note

Related Parts and Collections

• Oven elements collection
• Grill and bake elements collection
• Fisher & Paykel parts collection
• DeLonghi parts collection

Verified Compatible Models