Bosch Dishwasher Inlet Hose Aqua Stop - 00668113 668113

Water damage from a leaking or burst dishwasher inlet hose can be costly and disruptive. This genuine original Bosch dishwasher inlet hose (part 00668113 / 668113) features built-in Aqua Stop technology, which automatically cuts off the water supply the moment a leak or burst is detected inside the hose. It replaces a failed or aged inlet hose on a wide range of Bosch dishwasher models sold in New Zealand and Australia. In many cases this part solves E15, E16, E17, and E18 dishwasher error codes that indicate inlet hose or water-supply faults.

The Aqua Stop design places the safety solenoid valve inside the tap-end fitting, so flood protection is active the moment water enters the hose. Rated at IP67, it is waterproof and built to handle temperatures up to 70 degrees C. Total hose length is approximately 1650 + 300mm (1.65m hose with a 300mm Aqua Stop housing section). This is a direct replacement for the original Bosch dishwasher parts and is stocked at Steve's Appliance Spares for fast NZ dispatch.

Key Features

• Genuine original Bosch replacement inlet hose
• Aqua Stop flood protection -- solenoid valve built into the tap-end fitting automatically stops water on burst or leak
• Resolves common Bosch dishwasher error codes E15, E16, E17, and E18 in many cases
• IP67 rated -- fully waterproof construction
• Rated: 220-240V, maximum 10 bar pressure, maximum temperature 70 degrees C
• Length: 1650mm hose + 300mm Aqua Stop housing
• Fits nearly all Bosch dishwasher models -- see compatibility list and verified models table below
• Cross-references: also listed as 11059760 and 4010124
• Solid, durable hose material for long service life

Product Details

• Product code: 00668113 / 668113
• Cross-reference codes: 11059760, 4010124
• Type: Genuine original Aqua Stop safety inlet hose
• Electrical rating: 220-240V, IP67
• Max pressure: 10 bar
• Max temperature: 70 degrees C (Tm 70°C ABL03min/1.5min, Tm 25°C ED 100%, TU 60°C)
• Length: 1650 + 300mm
• Stock: Check live availability on the product page

Compatibility

Part 668113 fits a wide range of Bosch dishwasher models including (but not limited to): SN26M830AU, SN26M881AU, SN26M891AU, SN26M892AU, SPS60M08AU, SN66T092AU, SN66T093AU, SX66T090AU, SX66T091AU, SX66T093AU, SBV63M00AU, SMS63M38AU, SMS68M02AU, SMS40M12AU, and many others in the SN, SX, SMS, SPS, SBV, SBI, SCE, SMU, and SMI series. See the verified compatible models table at the end of this description for the full confirmed list. Please check your dishwasher's model number against the full compatibility list on the product page before ordering, or use our model spares directory to confirm the correct part for your machine.

How to Use and Installation Notes

• Turn off the water supply tap that feeds the dishwasher before starting.
• Pull the dishwasher out from under the bench to access the inlet hose connection at the back.
• Place a towel or small tray under the hose connection to catch residual water.
• Unscrew the existing inlet hose from the tap end and from the dishwasher's inlet valve.
• Connect the new 668113 Aqua Stop hose to the tap, then to the dishwasher inlet valve, hand-tightening securely at both ends.
• Turn the water supply back on and check both connections for leaks before pushing the dishwasher back into position.
• Run a short rinse cycle and re-check for leaks before returning to normal use.

Fitting and Safety Note

Related Parts and Collections

If you are also replacing the drain hose or need to extend the reach of the Aqua Stop hose, we stock the Bosch Universal Aquastop and Drain Hose Extension Kit 00350564. This extends both the inlet and drain connections by up to 3.6 metres and suits all Bosch dishwashers where the water connection is further than 1.2 to 1.4 metres from the appliance.

We also stock other Bosch Aqua Stop inlet hoses including the Bosch 263789 Aqua Stop safety hose and the Bosch 299756 Aquastop dishwasher inlet hose. Browse the full dishwasher and washing machine hoses collection for all available inlet and drain hose options.

• Dishwasher and washing machine inlet and drain hoses

• Bosch 263789 Aqua Stop safety inlet hose

• Bosch Universal Aquastop drain hose extension kit 00350564

• Model spares directory

Email us your model number at steve@appliancespares.nz if you need help confirming the correct Aqua Stop inlet hose for your Bosch dishwasher.

Fits many Bosch dishwasher models including:-